User Manual

GUID-8EDA8A82-09F4-420D-8DE0-82220E44E1C2
Replacing the status-light board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
GUID-F790821E-ACC3-4727-9074-DEAA58C40DBC
Procedure
1 Using the alignment posts, place the status-light board in the slot on the
computer base.
2 Slide the status-light board cable into the connector on the status-light board
and close the latch to secure the cable.
GUID-530FF952-5492-4C67-BD4E-C5D96A9C924E
Post-requisites
1 Replace the palm-rest assembly.
2 Replace the keyboard.
3 Follow the procedure from step 4 to step 6 in “Replacing the hard drive”.
4 Replace the battery.
5 Replace the base cover.
54