User Manual

GUID-5FDA8E9B-5CB1-4057-8C24-222940B45611
Removing the display hinge and
bracket assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
GUID-FD772283-A563-47E4-879F-0A972338692A
Prerequisites
NOTE: These instructions are applicable only for laptops with a non-touch
screen display.
1 Remove the base cover.
2 Remove the battery.
3 Follow the procedure from step 1 to step 3 in “Removing the hard drive”.
4 Remove the keyboard
5 Remove the palm-rest assembly.
6 Remove the fans.
7 Remove the display assembly.
8 Remove the display bezel.
9 Remove the display panel.
GUID-BE9E2DE8-EFDE-486F-B799-D10F03347536
Procedure
1 Note the antenna-cable routing and remove the antenna cables from the routing
guides on the display hinges.
104