Service Manual
Advanced
USB Wake Support Enables you to enable the USB devices to wake the computer from
Standby.
Numlock Key Enables you to set the status of the Numlock key during boot to On
or O.
Default: Disabled
SupportAssist System Resolution
Auto OS Recovery Threshold Control the automatic boot ow for SupportAssist System
Resolution Console and for Dell OS Recovery tool.
SupportAssist OS Recovery
The SupportAssist OS Recovery option will enable or disable the
boot ow for SupportAssist OS Recovery tool in the event of
certain system errors. If the SupportAssist OS Recovery setup
option is set to disabled then all automatic boot ow for
SupportAssist OS Recovery tool will be disabled.
Default: Disabled
Table 8. System setup options—Security menu
Security
Unlock Setup Status Displays if the setup status is unlocked.
Admin Password Status Displays whether the admin password is set.
System Password Status Displays whether the system password is set.
HDD Password Status Displays if the hard drive password is set.
Admin Password Enables you to set the admin password.
System Password Enables you to set the system password.
HDD Password Enables you to set the hard drive password.
Password Change Enable or disable changes to the System and Hard Disk
passwords when an administrator password is set.
Computrace Enable or disable tracking assets and providing recovery
services in the event the computer is lost or stolen.
Default: Deactivate
Firmware TPM Enables you to enable or disable the rmware TPM function.
Default: Enabled
PPI Bypass for Clear Command Allows you to control the TPM Physical Presence Interface
(PPI). When enabled, this setting will allow the OS to skip BIOS
PPI user prompts when issuing the Clear command. Changes to
this setting take eect immediately.
Default: Disabled
UEFI Firmware Capsule Updates Enables you to enable or disable the UEFI Firmware Capsule
Updates function.
Default: Enabled
System setup 67