Service Manual

7 Connect the power-supply unit cable (P1) to the system board (ATX CPU).

8 Connect the hard-drive power cables to the system board (SATA PWR).

9 Connect the hard-drive power cable to the system board (SATA PWR).

10 Connect the hard-drive data cable to the system board (SATA 3).

11 Connect the hard-drive cable to the system board (SATA 0).

12 Connect the hard-drive data cable to the system board (SATA 1).

13 Connect the optical-drive data cable to the system board (SATA 2).

14 Connect the processor-power cable to the system board (ATX SYS).

Replacing the system board