Service Manual

Removing the antenna modules

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside

your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Topics:

• Prerequisites

• Procedure

Prerequisites

1 Remove the computer cover.

2 Remove the front bezel.

3 Follow the procedure from step 1 to step 4 in “Removing the wireless card”.

Procedure

1 Using a plastic scribe, pry and peel the antenna modules (2) from the locations on the chassis.

2 Pull and route the antenna cables through the antenna-cable slot on the chassis.

50 Removing the antenna modules