Service Manual

Removing the solid-state drive/Intel Optane

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside

your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Topics:

• Prerequisites

• Procedure

Prerequisites

Remove the computer cover.

Procedure

1 Locate the solid-state drive or Intel Optane memory on the system board.

2 Remove the screw (M2x3.5) that secures the solid-state drive or Intel Optane memory to the system board.

3 Slide and remove the solid-state drive or Intel Optane memory from the M.2 card slot on the system board.

22 Removing the solid-state drive/Intel Optane