Service Manual

Replacing the front bezel

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside

your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Topics:

• Procedure

• Post-requisites

Procedure

1 Align the tabs on the front bezel with the slots on the chassis, and then rotate the front bezel towards the chassis until it snaps into

place.

NOTE

: Ensure that the front-bezel slot is aligned correctly with the optical drive.

2 Place the computer on its side.

16 Replacing the front bezel