White Papers
32 Dell Hybrid Cloud System for Microsoft Cloud Platform System Standard
• Dell PERC H330 Mini/Adapter RAID Controllers firmware version 25.5.5.0005 Fixes & Enhancements
o Fixes
-Fixed an issue where congested "I2C 4 PID 10 TIMEOUT but stop sent!" PERC debug TTY log events are
reported in 14G server systems.
-Fixed an issue in VMWare with a PERC 9 controller configured as a pass-through device which would
report in the PERC debug TTY log a false error stating "345=Controller encountered a fatal error and was
reset" during power-on of virtual machine, guest OS restart, or Guest OS shutdown.
-Fixed an issue where using Segmented Firmware Download (SFD) mode 7 to flash SATA drive FW on
some SATA drive models would fail.
-Fixed an issue where system could hang after performing Cryptographic Erase only from CTRL-R on
some ISE drive models.
-Fixed a corner case issue where reconnecting an external enclosure in which a "bad PHY" error
condition exists could cause a virtual disk to become inaccessible.
-Fixed an issue in VMWare with a PERC 9 controller configured as a pass-through device that would not
have firmware time sync after virtual machine starts.
-Fixed an issue where FW did not return COMMAND ABORT check condition 5/24/00 to the application
when App tries to read an unsupported VPD page from HDD with inquiry command.
o Enhancements
-Added support for PERC H730MX with the update of CPLD to version 20.
• Dell PERC H730/H730P/H830/FD33xS/FD33xD Mini/Adapter RAID Controllers firmware version 25.5.5.0005
Fixes & Enhancements
o Fixes
-Fixed an issue where congested "I2C 4 PID 10 TIMEOUT but stop sent!" PERC debug TTY log events are
reported in 14G server systems.
-Fixed an issue in VMWare with a PERC 9 controller configured as a pass-through device which would
report in the PERC debug TTY log a false error stating "345=Controller encountered a fatal error and was
reset" during power-on of virtual machine, guest OS restart, or Guest OS shutdown.
-Fixed an issue where using Segmented Firmware Download (SFD) mode 7 to flash SATA drive FW on
some SATA drive models would fail.
-Fixed an issue where system could hang after performing Cryptographic Erase only from CTRL-R on
some ISE drive models.
-Fixed a corner case issue where reconnecting an external enclosure in which a "bad PHY" error
condition exists could cause a virtual disk to become inaccessible.
-Fixed an issue in VMWare with a PERC 9 controller configured as a pass-through device that would not
have firmware time sync after virtual machine starts.
-Fixed an issue where FW did not return COMMAND ABORT check condition 5/24/00 to the application
when App tries to read an unsupported VPD page from HDD with inquiry command.
o Enhancements
-Added support for PERC H730MX with the update of CPLD to version 20.
• Intel NIC Family Version 18.8.0 Firmware for I350, I354, X520, X540, and X550 adapters Fixes &
Enhancements
Note: Firmware downgrade from 18.8.x to 18.5.x or older versions is not supported.