White Papers

26 Dell Hybrid Cloud System for Microsoft Cloud Platform System Standard
4. The analyzer runs for a minute or two, and then shows you the results, as illustrated by the following
graphic:
Under the Title “A firewall rule that allows remote shutdown should be enabled on each node in the
failover cluster” you should see a green ‘Passed’ result. If there are any compute nodes that are members
of this CCL cluster listed as having failed this test, you have run into this issue.
Resolution:
Reboot the affected nodes. After you have rebooted the affected nodes, run Analyze cluster updating
readiness again. Once it is in a Passed state, you can rerun the P&U.
Issue 4
Symptoms:
NVGRE issue. The Dell EMC Patch and Update framework does not bypass the “External” custom
property of any non-DHCS hardware in the stamp.
Description:
If you add non-DHCS hardware external servers to your stamp or have a different custom property setup on
any of the existing servers, you need to set the custom property as “External” for the framework to
bypass it.
The Microsoft P&U framework bypasses anything with custom property set to “External”, but the Dell
EMC framework does not. The Dell EMC P&U framework runs on a variation of Microsoft’s P&U framework,
and is a different package.