Administrator Guide

• System Center Management Con
guration
Figure 58. SCOM services
e Open the properties for each service, select the Log On tab, change the password to what was set in Active Directory Users
and Comput
ers in step b, and then click OK.
f Once the password has been set, right-click on each service, and select:
• Start
if not running
• Stop then Start if previously running
g Next, open the SCOM management console, and connect to the SCOM server if prompted, <
Prex >OM01.
h Select the
Administration workspace, and under the Run As Conguration menu option select Accounts.
Figure 59. Select Accounts under Run As Con
guration
i Double-click the SCOM action account,
< Prex >-SVC-OM, under the Action Account section to bring up the properties.
Figure 60. SCOM action accounts
j Select the
Credentials tab, type the same password that you set in Active Directory Users and Computers in step b, and then
click OK.
k Select the
Monitoring workspace, click Active Alerts under the Monitoring section, and close out any active alerts that pertain
to the Run As account not being able to log on.
Security 121