Administrator Guide

</IPv4Addresses>

</Role>

<Role Type="DPM" DeploymentStatus="DomainJoined" Name="S20DPM02" BackupHostName="S20B01"

ConfigurationID="b7a1b6bd-23ff-4f4b-b68e-20ac5e19d005" Password="">

d If you are running version 1.1 or later, do the following:

1 In the <BackupVMs> section, if the following line exists, remove it for each DPM VM:

2 Search for the <BackupDisk> section. Note the size values for XXXX and YYYY, and then replace the following:

</Volumes>

</BackupDisk>

With this (updating with the same values for XXXX and YYYY that were used previously):

</Volumes>

</BackupDisk>

9 Set the password eld in the .xml le for the backup host.

a In a Windows PowerShell session, run the following script to set the $password variable to the password you want to set.

password = "YourPassword"

ConvertTo-SecureString $password -AsPlainText -Force |

ConvertFrom-SecureString

b Copy the output of this script.

c In the XML le, search for the backup host name, and paste the output from the previous step between the quotes in the

Password="" eld.

<Nodes>

<Node Name="S20B01" DeploymentStatus="DomainJoined" ConfigurationID="828bc360-fd65-4304-

bc50-81ea4027ad7f" Password="

PasswordOutput

" SerialNumber="22PGD42">

For example:

<Nodes>

<Node Name="S20B01" DeploymentStatus="DomainJoined" ConfigurationID="828bc360-fd65-4304-

bc50-81ea4027ad7f"

Password="01000000d08c9ddf0115d1118c7a00c04fc297eb0100000012adbc74a67cfe48ac4404f29b4d43c

c000000000200000000001066000000010000200000001565d7d65f0ca2fcf0e0d82f24c481689ccdb7aa4d85

ac400906c7768e6228ba000000000e8000000002000020000000750649ad99b3809f7b66f9eb1ff4bb67afa10

8bac79372a56b53ca81ef235c5e30000000eb537f00952fc2d36d3821571b65fc7ccca26066e47eb5de0be691

9a3a24f08e693031d3b8928e1cfa00d32410dfacda40000000e53617e63be31270a1ed37cb2f54682f802a171

Operations