Administrator Guide
e Under Compute stack, click Resource Management.
f Under Target network, the service detects the VM networks on the target location and lists them. Choose the appropriate
target network, as identied in Step 1 of this procedure, and then click OK.
Figure 16. Add network mapping
This step triggers a job.
g To track the progress of the job triggered in the previous step, click Settings. Under Monitoring and reports, click Jobs.
h In Jobs, under General, click Site Recovery jobs.
Step 5: Run a failover
After the initial replication, you can run failovers as desired. The three types of failovers are:
• Test
• Planned
• Unplanned.
You can run failovers as follows:
1 Test failover—Run to verify the environment without having any impact on the production infrastructure. You can run a test failover if
the tenant requests it. Run a test failover as follows:
a In the Azure portal, create a separate virtual network for test purposes. Use the same subnet settings as the VM network which
your test VM is connected to on the VMM server.
b In Recovery Services vaults, click the name of the vault for the Dell Hybrid Cloud System for Microsoft deployment.
c In Settings, under Protected Items, click Replicated items.
d Click the VM that you want to fail over.
e Click Test Failover.
54
Administration