Administrator Guide
How to run the MCPasswordReset script
Do the following:
1 Log on to the Console VM.
2 Open Windows PowerShell.
3 Change directories to C:\Program Files\Microsoft Cloud Solutions\PasswordReset.
For example: PS C:\Users> cd C:\Program Files\Microsoft Cloud Solutions\PasswordReset.
4 Type the following command to start the script, and then press Enter.
.\MCPasswordReset.ps1
For example, PS C:\Program Files\Microsoft Cloud Solutions\PasswordReset> .\MCPasswordReset.ps1.
5 You are prompted to provide <
Prex
>-Setup-Admins credentials. Specify the user name and password. You do not have to provide
the domain. For example, specify a user name of Admin1, as shown in the following screenshot. Do not specify Domain\Admin1.
Figure 46. Admin login
6 The script displays progress while it runs. Do not close the Windows PowerShell session or try to interrupt the script while it is running.
If you interrupt the script, this can put the components in an inconsistent state. The script typically requires 12-15 minutes to nish.
The following screenshot is an example of the report that is displayed when the script nishes. If the Status of any of the runbooks is
Failed or Failed to complete, see Troubleshooting the MCPasswordReset script. To view MCPasswordReset log les, see Viewing
MCPasswordReset script logs.
Figure 47. MCPasswordReset report
These are the tasks performed by the MCPasswordReset script, in order:
1 The script veries that the following required Dell Hybrid Cloud System for Microsoft components are available and running normally.
If these components are not running, the script stops:
120
Security