White Papers

33 Dell Hybrid Cloud System for Microsoft Cloud Platform System Standard
o Fixes:
- Added HTTPS support for Firmware Update feature
o Enhancements:
- Security/IPS fixes
• Dell PERC H330 Mini/Adapter RAID Controllers firmware version 25.5.6.0009 Fixes & Enhancements
o Fixes
- Controller is less likely take a logical drive offline in VSAN
- Controller now passes the proper drive group while creating a configuration using HII
- Controller now retains HII device setting after a boot
- Controller now gives status on all drives including failed drives with Perc CLI "show all" command
- Controller now performs Patrol Read on SSD drives to better align with the industry
- Reinserting a drive from a VD will no longer lead to a foreign state
- Controller now handles crypto erase on Micron 5100 SSD drives
- Controller reduces delay if there is a bad PHY condition at boot
- Controller now reports smart trip condition on non-Raid drives
- Reduces PL errors 0x3110e03 and 0x31110d01 after resetting a SATA target
- Controller now gives correct messaging when a power supply is hot removed from an enclosure
- Controller better handles poorly formed ATA passthrough CDBs.
- Unsupported "Raid00" option in HII has been removed
- Fixed an isolated issue where an exception error could occur during boot. The symptoms include a
hang during system boot which displays "FW initializing" on screen for two hours or more, and iDRAC LC
log reporting "PR8 Device not detected"
o Enhancements
- Controller reduces the bad block count print in the ttylog to once each boot
- Removed "timeout > 3600" prints to the TTYlog
- Controller has improved detection of a failed battery
• Dell PERC H730/H730P/H830/FD33xS/FD33xD Mini/Adapter RAID Controllers firmware version 25.5.6.0009
Fixes & Enhancements
o Fixes
- Controller is less likely take a logical drive offline in VSAN
- Controller now passes the proper drive group while creating a configuration using HII
- Controller now retains HII device setting after a boot
- Controller now gives status on all drives including failed drives with Perc CLI "show all" command
- Controller now performs Patrol Read on SSD drives to better align with the industry
- Reinserting a drive from a VD will no longer lead to a foreign state
- Controller now handles crypto erase on Micron 5100 SSD drives
- Controller reduces delay if there is a bad PHY condition at boot
- Controller now reports smart trip condition on non-Raid drives
- Reduces PL errors 0x3110e03 and 0x31110d01 after resetting a SATA target
- Controller now gives correct messaging when a power supply is hot removed from an enclosure
- Controller better handles poorly formed ATA passthrough CDBs.
- Unsupported "Raid00" option in HII has been removed
o Enhancements
- Controller reduces the bad block count print in the ttylog to once each boot
- Removed "timeout > 3600" prints to the TTYlog
- Controller has improved detection of a failed battery