Developers Guide

Restore Dell Hybrid Client on Wyse 5070
device
Prerequisites
NOTE: Ensure that you have backed up the data on the target device before you begin the restore process.
Create a bootable USB drive that is configured with the ISO image for Wyse 5070 device. See Download the Dell Hybrid Client
ISO file.
Steps
1. Power off the Wyse 5070 device and connect the USB drive that is configured for Wyse 5070.
2. Power on the device and go to the boot options by pressing the F12 key.
3. At the boot menu, select the connected USB drive and press the Enter key.
4. Select Dell Recovery on the next screen, and press the Enter key.
5. Select the Install Dell Hybrid Client option on the Dell recovery screen, and click Continue.
NOTE: If there are multiple drives present on the device, select any drive from the drop-down list to continue.
6. Follow the on-screen instructions to complete the installation process.
Next steps
The device boots into Dell Hybrid Client when the installation is complete. The device registers to Wyse Management Suite by
the auto discovery method. Alternatively, you can register the device manually to Wyse Management Suite using the Dell Client
Agent user interface.
For information about how to use the Dell Client Agent window to manually register the device to Wyse Management Suite, see
the Dell Hybrid Client Administrator's Guide at www.dell.com/support.
5
8 Restore Dell Hybrid Client on Wyse 5070 device