Administrator Guide

ManualsBrandsDell ManualsConverged InfrastructureHybrid Client

Steps

1. Log in to Wyse Management Suite.

2. Go to the Groups & Configs page, and select your preferred group.

3. Click Edit Policies > Hybrid Client.

The Configuration Control | Hybrid Client page is displayed.

4. Click the Advanced tab.

5. Expand Privacy & Security, and click SSH Server.

6. Click the SSH Server toggle key to enable an SSH connection from a remote device. Use sshuser as username to

establish an SSH connection.

7. Enter a password for the SSH-enabled user.

8. Optionally, you can grant elevated privileges to an SSH-enabled user on the device powered by Dell Hybrid Client. To enable

the option, click the Allow elevated privileges to sshuser toggle key. If the option is not in use or not required, Dell

Technologies recommends keeping the option disabled.

NOTE: Use the option with caution as granting elevated privileges to an SSH-enabled user may lead to inappropriate

use of access on the device.

9. Click Save and Publish.

Next steps

1. On a remote device, open the SSH client terminal application.

2. Connect to your Dell Hybrid Client using the username sshuser. When prompted, enter the password for sshuser.

Configure the VNC settings

Dell Hybrid Client can be accessed remotely using VNC. Use Wyse Management Suite to configure the VNC server preferences.

Prerequisites

As an administrator, you must install the VNC optional add-on to enable the VNC access. To install the VNC add-on on Dell

Hybrid Client, do the following:

1. Go to www.dell.com/support.

2. In the Enter a Service Tag, Serial Number, Service Request, Model, or Keyword field, type the model number of your

device or type Dell Hybrid Client.

3. Click the product from search results to open the product support page.

4. On the product support page, click Drivers & downloads.

5. Select the operating system as Ubuntu 18.04 LTS.

6. From the list, locate the VNC add-on entry and click the download icon.

7. After the add-on is downloaded successfully, use the application policy on Wyse Management Suite to deploy the add-on to

Dell Hybrid Client. For more information about how to deploy an application policy, see the Dell Wyse Management Suite

Administrator's Guide at www.dell.com/support.

NOTE:

If you have configured the Dell Hybrid Client policy settings before the add-on installation, you must reapply the

configured settings after you deploy the add-on.

Steps

1. Log in to Wyse Management Suite.

2. Go to the Groups & Configs page, and select your preferred group.

3. Click Edit Policies > Hybrid Client.

The Configuration Control | Hybrid Client page is displayed.

4. Click the Advanced tab.

5. Expand Privacy & Security, and click VNC Server.

6. Click the VNC Server toggle key to enable a VNC connection from a remote device.

7. Click the Warning on VNC access toggle key if you want to show the VNC access warning at the start of the connection.

8. Click the Remote access confirmation prompt on session start toggle key if you want to show the VNC shadowing

accept or decline prompt message. If enabled, the confirmation prompt is displayed at the start of the VNC session.

Security configurations