Administrator Guide

Steps
1. Log in to Dell Hybrid Client.
2. Click the Show Applications icon on the desktop screen.
All RDP desktops are displayed.
3. Click a desktop icon to launch the RDP desktop.
Connect to an RDP session using TS Gateway with WebSocket
WebSocket provides a mechanism for fast, secure two-way communication between a client and a server over the web using
HTTP(S). The WebSocket protocol enables two-way communication between the browser-based applications and the servers
that do not rely on the multiple HTTP connections. The protocol consists of a handshake followed by basic message framing,
layered over Transmission Control Protocol (TCP). The data is transferred immediately over a full-duplex single socket
connection, allowing messages to be sent and received from both endpoints in real time.
Prerequisites
Enable Terminal Services Gateway (TSGW) and WebSocket protocol for the applications and desktops from the RDS server.
Steps
1. Log in to Wyse Management Suite.
2. Go to the Groups & Configs page, and select your preferred group.
3. Click Edit Policies > Hybrid Client.
The Configuration Control | Hybrid Client page is displayed.
4. Click the Advanced tab.
5. Expand RDP, and click RDP Broker Session.
6. Click Add Row.
Figure 34. RD Gateway settings
7. In the RDP Connection section, do the following:
a. Click the RD Gateway toggle key to enable RD Gateway.
b. In the RDP Gateway Server field, enter the RD Gateway host address.
c. Specify the RDP username, password, and domain.
8. Click Save & Publish.
9. Log in to Dell Hybrid Client.
10. Connect to an RDP desktop.
In the TSG server, there is only one entry from the client with TCP port to send and receive information.
Configuring the VDI environment
55