Administrator Guide

Configure the power settings locally
Use the Device Settings window on Dell Hybrid Client to configure the power settings. You can also configure the power
settings using Wyse Management Suite.
Steps
1. Log in to the device powered by Dell Hybrid Client.
2. Click the Show Application icon on the desktop screen.
The Applications Overview screen is displayed.
3. Click the Device Settings icon.
The Device Settings window is displayed.
4. Click Power Settings, and configure the following settings:
● Power Saving—Use this option to configure the Power Saving settings.
Click the Power Saving tab, and do the following:
a. Click the WiFi toggle key to disable WiFi to save power.
b. Click Save & Apply.
Figure 25. Power Saving
NOTE:
Use the Reset to Default button to reset your settings to default values. To discard your changes, click the
Discard Changes button.
● Suspend & Power—Use this option to configure the Suspend & Power settings.
Click the Suspend & Power tab, and do the following:
a. From the Blank Screen drop-down list, select the idle time after which the blank screen is to be displayed.
b. Click the Auto Suspend toggle key to enable the device to enter the power state automatically after the specified
idle time.
c. From the Delay drop-down list, select the time to wait after a period of inactivity.
d. From the Power Button Action, select the action of the Dell Hybrid Client to be performed after the idle time has
elapsed.
e. Click Save & Apply.
42
Configuring the local settings