Administrator Guide

● From the Multi Monitor Common Rotation drop-down list, select a common rotation option for multiple displays.

This option is displayed when you select the monitor count as more than 3.

Figure 16. Multi-monitor settings

6. Click Save & Apply.

NOTE:

Use the Reset to Default button to reset your settings to default values. To discard your changes, click the

Discard Changes button.

Configure the peripheral settings locally

Use the Device Settings window on the Dell Hybrid Client to configure your peripheral settings. You can also configure the

peripherals settings using Wyse Management Suite.

Steps

1. Log in to the device powered by Dell Hybrid Client.

2. Click the Show Application icon on the desktop screen.

The Applications Overview screen is displayed.

3. Click the Device Settings icon.

The Device Settings window is displayed.

4. Click Peripherals Management.

5. Configure the following peripherals settings based on your requirement:

● Keyboard—Use this option to configure the keyboard settings.

Click the Keyboard tab, and configure the following options:

a. Move the Keyboard Repeat Rate slider to set the keyboard repeat rate. The keyboard repeat rate specifies the

speed at which the key repeats itself after you press and hold down a key on the keyboard.

b. Move the Keyboard Repeat Delay slider to set the time for Repeat Delay. The keyboard repeat delay specifies the

pause between pressing a key on the keyboard and when the key starts repeating itself.

c. From the Keyboard Layout drop-down list, select a keyboard layout. The default value is English (United States).

d. Click the Turn Off Num Lock toggle key to enable the Num lock key on your keyboard. Enabling the Num Lock

allows you to use the keypad numeric pad.

e. Click the PrintScreen toggle key to enable the Print Screen key on your keyboard. Enabling the Print Screen allows

you to take a screenshot of the whole screen.

f. Click Save & Apply.

Configuring the local settings