Administrator Guide

Configuring the local settings
You can configure the local settings on the device using the Device Settings window. Depending on user—normal user or
guest user—some dialog boxes and options are available for use.
NOTE: Any settings that are configured locally on Dell Hybrid Client take precedence over the settings that were
configured using Wyse Management Suite.
To access the Device Settings window, click the Show Applications icon on the desktop screen, and then click Device
Settings.
Figure 12. Device Settings
Configure the network settings locally
Use the Device Settings window on Dell Hybrid Client to configure the network settings. You can also configure the network
settings using Wyse Management Suite.
Steps
1. Log in to the device powered by Dell Hybrid Client.
2. Click the Show Application icon on the desktop screen.
The Applications Overview screen is displayed.
3. Click the Device Settings icon.
The Device Settings window is displayed.
4. Click Network Configuration.
5. Configure the following network settings based on your requirement:
● Ethernet—Use this option to configure a wired connection.
○ Auto—If you configure the Ethernet settings through the DHCP options, the Auto toggle key is turned on.
6
Configuring the local settings 33