Administrator Guide

9. Enter the Uniform Resource Identifier (URI) in the URI field.
For example, lpd://uncpath or ipaddress/Queuename.
10. Enter the installed driver name in the Model field.
11. Click the Enable toggle key to enable the device to access the printer.
12. Click the Default toggle key to set the printer as the default printer.
13. Enter the description for your printer in the Description field.
14. Enter the network path where the printer is located in the Location field.
15. Click Save & Publish.
16. Log in to Dell Hybrid Client.
The configured printer is listed.
Configure the custom connection settings
Dell Hybrid Client enables you to create and manage custom connections. You can use Wyse Management Suite to configure the
custom connection settings.
Prerequisites
As an administrator, you must install the optional custom connection add-on to create custom connections. To install the
custom connection add-on on Dell Hybrid Client, do the following:
1. Go to www.dell.com/support.
2. In the Enter a Service Tag, Serial Number, Service Request, Model, or Keyword field, type the model number of your
device or type Dell Hybrid Client.
3. Click the product from search results to open the product support page.
4. On the product support page, click Drivers & downloads.
5. Select the operating system as Ubuntu 18.04 LTS.
6. From the list, locate the custom connection add-on entry and click the download icon.
7. After the add-on is downloaded successfully, use the standard application policy on Wyse Management Suite to deploy the
add-on to Dell Hybrid Client. For more information about how to deploy a Standard App Policy, see the Dell Wyse
Management Suite Administrator's Guide at www.dell.com/support.
Steps
1. Log in to Wyse Management Suite.
2. Go to the Groups & Configs page, and select your preferred group.
3. Click Edit Policies > Hybrid Client.
The Configuration Control | Hybrid Client page is displayed.
4. Click the Advanced tab.
5. Expand Custom Connections, and click Custom Connections.
6. Click Add Row and configure the following settings for a single custom connection:
a. Enter the connection name to be displayed on Dell Hybrid Client.
b. In the Command field, enter the validated shell commands or scripts. The shell commands or scripts run when you click
the connection icon on the Dell Hybrid Client desktop.
NOTE: Do not use unknown commands or applications with unknown options for better security.
c. Click the Auto Launch Connection after Logon toggle key to enable or disable the option. If enabled, the connection is
automatically connected after you log in to your Dell Hybrid Client.
d. Click the Auto Reconnect toggle key to enable or disable the option. If enabled, the connection is automatically
reconnected after you disconnect from the session. You must also specify the time duration in seconds to delay the
reconnection attempt after a disconnection occurs.
e. Browse and upload an icon for the custom connection. You can also choose to use the default icon as the connection
icon.
7. To create multiple custom connections, repeat step 6.
8. Click Save and Publish.
Getting started with Dell Hybrid Client
29