Administrator Guide

The validation status of the devices is also displayed in the Devices section on the Dashboard page.
For more information about validating enrollment, see Validate the enrollment of a device.
Validate the enrollment of a device
You can enable Enrollment Validation to allow administrators to control the manual and auto registration process of devices
powered by Dell Hybrid Client to a group. You can filter the devices in Pending Validation state by clicking the Pending count
in the Dashboard page or by selecting the Enrollment Validation Pending in the Status drop-down list on the Devices page.
Prerequisites
● You must enable the Enrollment Validation option when you install Wyse Management Suite—OOBE screen or in the
Portal Administration page—Setup option.
NOTE: The Enrollment Validation option is enabled by default when installing Wyse Management Suite for the first time
or when using a Wyse Management Suite Cloud.
● The device must be in Enrollment Pending state.
Steps
1. Select the check box of the device that you want to validate.
2. Click the Validate Enrollment option.
An Alert window is displayed.
3. Click Send Command.
The device moves to the wanted group, and the device is registered.
Registering Dell Hybrid Client to Wyse Management Suite
15