Administrator Guide

c. Click the Allow custom signed application toggle key to ON state to allow custom-signed applications to be
installed on Dell Hybrid Client. By default, the option is disabled.
d. Browse and upload one or more signed certificates. Supported file types are .crt and .cer.
e. Click Save and Publish.
6. Use the standard application policy or the advanced application policy to deploy the custom-signed application to Dell Hybrid
Client.
For information about how to use the standard application policy or the advanced application policy, see the Dell Wyse
Management Suite Administrator's Guide at www.dell.com/support.
Install an unsigned application
Steps
1. Log in to Wyse Management Suite.
2. Go to the Groups & Configs page, and select your preferred group.
3. Click Edit Policies > Hybrid Client.
The Configuration Control | Hybrid Client page is displayed.
4. Click the Advanced tab.
5. Depending on the version of the Dell Hybrid Client software that you have installed on your device, configure the following
options:
●
Devices powered by Dell Hybrid Client version 1.5:
a. Expand Privacy & Security and click Security Profile.
b. From the Security Profile drop-down list, select Low.
c. Click Save and Publish.
● Devices powered by Dell Hybrid Client version 1.1:
a. Expand Application Security, and click Application Deployment.
b. Click the Secure Deployment Mode toggle key to OFF state to allow unsigned applications to be installed on Dell
Hybrid Client. By default, the option is disabled.
NOTE:
Use the option with caution as installing unsigned third-party applications may be insecure and can make
the device vulnerable to security threats.
c. Click Save and Publish.
6. Use the standard application policy or the advanced application policy to deploy the unsigned application to Dell Hybrid
Client.
When using the advanced application policy, you can place any file in the client drive by selecting the file and using the Pre
install option. In the script file, mention the source as /etc/WMSApps. The destination path is a user-specific directory.
For example, you can copy an MP4 file to the Dell Hybrid Client-powered device using the advanced application policy
on Wyse Management Suite. You must use the .sh file as a prescript file—cp /etc/WMSApps/taskbar.mp4 /home/
[e-mail]/Documents.
a. Copy the MP4 file and the prescript file to C:\WMS\LocalRepo\repository\hybridClientApps path.
b. On Wyse Management Suite, go to Apps & Data, and click Hybrid Client in the App Polices section.
c. Click Advanced Policy.
d. Enter the policy name.
e. From the Group drop-down list, select your preferred group.
f. From the Task drop-down list, select Install Application.
g. From the OS Type drop-down list, select Hybrid Client.
h. Click Add app and do the following:
i. From the Apps drop-down list, select the MP4 file.
ii. From the Pre-Install drop-down list, select the .sh file.
iii. Specify the install timeout period.
i. Save and deploy the policy to the device.
j. After successful deployment, open File Explorer on Dell Hybrid Client and verify if the MP4 file is available in the
Documents folder.
For information about how to use the standard application policy or the advanced application policy, see the Dell Wyse
Management Suite Administrator's Guide at www.dell.com/support.
80
User applications