Administrator Guide

￭ From the IPv4 Method drop-down list, select the type of IPv4 configuration.
￭ Enter the IP address of the DNS server in the IPv4 DNS field.
￭ Enter the domain for DNS lookups in the IPv4 DNS search field.
￭ Click the IPv4 Ignore Auto DNS toggle key to ignore the automatically configured DNS.
￭ Enter the IP route in the IPv4 Routes field.
￭ Click the IPv4 Ignore Auto Routes toggle key to ignore the automatically configured routes.
￭ Enter the IP address of the connection in the IPv4 ip4 field.
￭ Enter the default Gateway in the IPv4 gw4 field.
￭ Enter the network mask in the IPv4 Netmask field.
￭ Enter the size of the Maximum Transmission Unit in the MTU field.
NOTE: Use the Reset to Default button to reset your settings to default values. To discard your changes on the
current window, click the back arrow. To discard your unsaved changes across the application, click the Discard
Changes button.
● Bluetooth—Use this option to configure Bluetooth.
Click the Bluetooth tab, and do the following:
a. Click the Advanced settings.
b. Click the ON/OFF button to enable or disable Bluetooth.
● Wireless—Use this option to configure a wireless connection. This option is available only if the device is connected to
WiFi. The wireless network name (SSID) is automatically displayed upon successful connection. This option is added from
Dell Hybrid Client version 1.5 onwards.
Click the Wireless tab, and do the following:
a. Enter the IP address of the DNS server in the IPv4 DNS field.
b. Click the IPv4 Ignore Auto DNS toggle key to ignore the automatically configured DNS.
NOTE:
Use the Reset to Default button to reset your settings to default values. To discard your changes on the
current window, click the back arrow. To discard your unsaved changes across the application, click the Discard
Changes button.
● VPN—Use this option to configure the VPN settings. This option is available from Dell Hybrid Client version 1.5 onwards.
Click the VPN tab, and do the following:
a. Click the VPN toggle switch to enable the VPN connection.
b. In the VPN Server URL field, enter the IP address, hostname, or FQDN of the VPN server.
c. From the Protocol drop-down list, select either CiscoAnyConnect or GlobalProtect based on your preference.
NOTE:
Use the Reset to Default button to reset your settings to default values. To discard your changes on the
current window, click the back arrow. To discard your unsaved changes across the application, click the Discard
Changes button.
6. Close the application.
Configuring the display settings locally
Use the Device Settings window on the Dell Hybrid Client to configure your display settings. You can also configure the display
settings using Wyse Management Suite.
Steps
1. Log in to the device powered by Dell Hybrid Client.
2. Click the Show Application icon on the desktop screen.
The Applications Overview screen is displayed.
3. Click the Device Settings icon.
The Device Settings window is displayed.
4. Click Monitor Settings.
5. Configure the following display settings based on your requirement:
a. From the Primary Monitor Resolution drop-down list, select a screen resolution for the primary display.
NOTE:
The selected screen resolution works only if the display that is connected to the device supports the
resolution.
Configuring the local settings 39