Administrator Guide

10. Enter the name of the queue associated with the printer in the Queue field. An LPD host maintains a named queue for each
supported printer.
11. Enter the installed driver name in the Model field.
12. Click the Enable toggle key to enable the device to access the printer.
13. Click the Default toggle key to set the printer as the default printer.
14. Enter the description for your printer in the Description field.
15. Enter the network path where the printer is located in the Location field.
16. Click Save & Publish.
17. Log in to Dell Hybrid Client.
The configured printer is listed.
Configure the SMB printer settings
Steps
1. Log in to Wyse Management Suite.
2. Go to the Groups & Configs page, and select your preferred group.
3. Click Edit Policies > Hybrid Client.
The Configuration Control | Hybrid Client page is displayed.
4. Click the Advanced tab.
5. Expand Peripheral Management, and click Printers.
6. In the Printer Connection section, click Add Row.
7. From the Printer Type drop-down list, select SMB.
8. Enter the name of the printer in the Name field.
9. Enter the hostname in the Host field. For SMB printer, you can enter the UNC path of the printer server or the IP address
followed by the printer share name.
10. Enter the name of the domain user in the Domain User Name field.
For example, Workgroup (Domain)\Username.
11. Enter the domain password in the Password field.
12. Enter the domain address in the Domain field.
13. Enter the installed driver name in the Model field.
14. Click the Enable toggle key to enable the device to access the printer.
15. Click the Default toggle key to set the printer as the default printer.
16. Enter the description for your printer in the Description field.
17. Enter the network path where the printer is located in the Location field.
18. Click Save & Publish.
19. Log in to Dell Hybrid Client.
The configured printer is listed.
Configure the URI printer settings
Steps
1. Log in to Wyse Management Suite.
2. Go to the Groups & Configs page, and select your preferred group.
3. Click Edit Policies > Hybrid Client.
The Configuration Control | Hybrid Client page is displayed.
4. Click the Advanced tab.
5. Expand Peripheral Management, and click Printers.
6. In the Printer Connection section, click Add Row.
7. From the Printer Type drop-down list, select URI.
8. Enter the name of the printer in the Name field.
9. Enter the Uniform Resource Identifier (URI) in the URI field.
Getting started with Dell Hybrid Client
29