Administrator Guide

Table 6. Configuring device by using DNS SRV record (continued)
URL/Tag Description
Enter False, if you have not imported the SSL certificates from a well-known
authority for https communication between the client and Wyse Management
Suite server.
NOTE: If the value is not configured, True is considered as the default
value.
NOTE: You must manually log in as a guest user on each device, accept the End-User License Agreement (EULA), and then
wait for the device to register to Wyse Management Suite.
Enrollment Validation
In Wyse Management Suite, the Enrollment Validation option is introduced where the tenant must manually approve before
the device is registered to a group.
When the Enrollment Validation option is enabled, the auto-discovered devices are in Pending Validation state in the
Devices page. The tenant can select a single device or multiple devices in the Devices page by selecting the Enrollment
Validation Pending filter from the Status drop-down list and validate the enrollment. You can also click the Enrollment
Pending link on the Dashboard page. The devices are moved to the intended group after they are validated.
NOTE:
The Enrollment Validation option is disabled for existing tenants in the public cloud or when you upgrade
on-premise tenants.
The validation status of the devices is also displayed in the Devices section on the Dashboard page.
For more information about validating enrollment, see Validate the enrollment of a device.
Validate the enrollment of a device
You can enable Enrollment Validation to allow administrators to control the manual and auto registration process of devices
powered by Dell Hybrid Client to a group. You can filter the devices in Pending Validation state by clicking the Pending count
in the Dashboard page or by selecting the Enrollment Validation Pending in the Status drop-down list on the Devices page.
Prerequisites
● You must enable the Enrollment Validation option when you install Wyse Management Suite—OOBE screen or in the
Portal Administration page—Setup option.
NOTE:
The Enrollment Validation option is enabled by default when installing Wyse Management Suite for the first time
or when using a Wyse Management Suite Cloud.
● The device must be in Enrollment Pending state.
Steps
1. Select the check box of the device that you want to validate.
2. Click the Validate Enrollment option.
An Alert window is displayed.
3. Click Send Command.
The device moves to the wanted group, and the device is registered.
14
Registering Dell Hybrid Client to Wyse Management Suite