Deployment Guide

Steps
1. Register the Dell Hybrid client image to Wyse Management Suite. For details about how to register, see Adding Hybrid Client
images to repository.
● If the storage size of the device is more than 16 GB, use DHC_CONVERSION_5070.exe.
● If the storage size of the device is 16 GB, use DHC_CONVERSION_5070_16GB.exe.
2. Create the Dell Hybrid Client image policy. For details on how to create Hybrid Client image policy, see Creating Hybrid Client
image policies.
3. Convert the device to Dell Hybrid Client. For details on how to schedule an image, see Scheduling the image policy.
● The device receives an image update notification. The boot agent downloads the image from the Wyse Management
Suite repository and installs the Dell Hybrid Client image by internally triggering the Dell Recovery Tool. After the imaging
is completed, the device boots to Dell Hybrid Client.
● Dell Client Agent registers the device, as Dell Hybrid Client to Wyse Management Suite.
● Wyse Management Suite manages the device as a Dell Hybrid Client device.
Adding Dell Hybrid Client images to repository
Steps
1. Copy the Dell Hybrid Client conversion image to the repository location or the operating system images folder using Wyse
Management Suite.
NOTE: Dell Technologies recommends to copy the image file to the local system and then copy the file to Wyse
Management Suite repository location. Wyse Management Suite extracts the files from the zipped folder and uploads
the files to the repository location or operating system images folder.
The image is added to the repository.
2. Go to Apps & Data > OS Image Repository > Hybrid Client to view the saved image.
Figure 9. Adding Dell Hybrid Client images to repository
Convert Dell Wyse 5070 devices to Dell Hybrid Client
13