White Papers
These scripts were tested in the lab on the following setup:
PowerEdge M420 iDRAC version: 1.30.30.
PowerEdge M420 BIOS version: 1.2
PowerEdge M1000e CMC firmware version: 4.30
Dell OpenManage Server Administrator version: 7.2
M1000e Chassis Midplane Version = 1.1
- All ports on the MXL switch were configured as “switchport” with default VLAN id 1.
Please refer to the attachments of this blog for scripts used in this solution.
References:
http://i.dell.com/sites/doccontent/shared-content/data-
sheets/en/Documents/PowerEdge_M_Series_Blades_IO_Guide.pdf