White Papers

14 Dell HPC Omni-Path Fabric: Supported Architecture and Application Study June 2016
3.3 Chassis Viewer
Chassis viewer is a web interface which can be used to manage basic functionalities on edge switches with
and without management cards. The following picture exemplifies the basic layout of Chassis Viewer:
Figure 7 Intel
®
Omni-Path Chassis Viewer Overview
1. The LED lights at the center are “green” if the ports are active and “white” when in the polling state or
the cables are not connected. It also shows the port status for PSU 1 & 2 and these LED indicators go
red if any of the PSU’s need attention.
2. The main tab shows the LED and sensor information for chassis status, chassis attention, airflow
indication, FM enabled, power supply units and fan trays. Toggling between the tabs shows detailed data
on the chassis such as: Out of band IP information, FRU information, Power supply information, Fan
Information and Backplane Information.
3. The main menu to the left shows options to manage the logging levels, maintenance of the switch,
SNMP, Config File Admin, Chassis Traps, Port Stats, Time Service, OOB LAN IP, Subnet Manager