White Papers

Dell HPC General Computing – Configuration and Supported Architecture with Dell PowerEdge 13th Generation Servers

The Infiniband bandwidth and bi-bandwidth for 12core processor servers is fairly consistent across all snoop

modes.

PowerEdge FC830

This server is a full-width form factor and holds up to 2 nodes per PowerEdge FX2 enclosure.

 Intel® Xeon E5-4600 v3 up to 18 cores

 Processor support of 55W, 65W, 85W, 90W,105W, 120W, 135W

 Four socket

 Four QPI links up to 9.6 GT/s

 1333, 1600, 1866, 2133 MHz (3DPC) DDR4 DIMMs

 4GB/8GB/16GB/32GB/64GB DIMM, maximum memory support up to 2048GB

 Option for Broadcom/Intel/Qlogic NDCs (1Gb/s or 10Gb/s) (dual port or quad port)

 Two PCIe 3.0 x16 mezzanine slots

 Maximum storage up to 8 x 2.5” SAS or 16 x 1.8” SSD

 CMC and iDRAC8 available for system Management

PowerEdge M630

This server is a half height blade that plugs into a 10U M1000e chassis. The chassis can support upto 16 M630

blades.

 Two socket

 Two QPI links up to 9.6 GT/s

 1333, 1600, 1866, 2133 MHz (3DPC) DDR4 DIMMs, RDIMM & LR-DIMM

 4GB/8GB/16GB/32GB DIMM,

 Option for Broadcom/Intel/Qlogic Mezz (1Gb/s or 10Gb/s)

 Two PCIe 3.0 x8 Mezz slots

 Support for dual port FDR /FDR10 and QDR Infiniband Mezz card

 SAS, SATA, Near-line SAS, support

PowerEdge M830

This is a full-height form factor and holds up to 8 nodes per M1000e enclosure.