Administrator Guide

11 RAPIDS Scaling on Dell EMC PowerEdge Servers
3 Results on Single Node
The following session shows the results on single node mode for each server tested.
2014 Year Dataset SATA Data vs NVMe Data:
We started with 2014-year dataset (26.5GB) using PowerEdge servers C4140-M with NVIDIA V100-SXM2-
16GB and R940xa with NVIDIA V100PCle-16GB and V100PCle-32GB. The results shown below were
conducted with the feature RMM disabled. See Figure 7
Figure 7. Performance on Dell EMC PowerEdge Servers in Single Node
RMM enable vs RMM disable:
On the server with 32GB device memory PowerEdge R940xa (4xV100PCle-32GB) with 2014-year dataset,
the RMM feature was tested on enable and disable mode; RMM enable yielded the shortest total E2E time
(~101 seconds), 19% faster than its configuration with RMM disable (~124 seconds). See Figure 8.
Figure 8. Performance on Server R940xa with RMM enable vs RMM disable