Users Guide

Features of Dell HBA355i front card
Figure 2. Features of Dell HBA355i front card
1. PCIe input connector 2. Power edge connector
3. Heatsink 4. Primary SAS output card edge connector port A
5. Secondary SAS output connector port B
Technical specification of Dell HBA355i
The table below describes the Dell HBA355i card specifications that are applicable to both adapter and front form factors.
Table 1. Dell HBA355i card specifications
Feature Dell HBA355i
Processor LSI Fusion-MPT 12 G SAS/PCIe Secure SAS38xx
Drive types SAS, SATA
Non-RAID Yes
Boot support Yes
Queue depth 8320
NOTE: Thermal polling is enabled for SATA drives by default. For more information about configuring, see iDRAC RACADM
CLI Guide available at www.dell.com/idracmanuals.
PowerEdge systems supported by Dell HBA355i
The following PowerEdge systems support the Dell HBA355i controller:
● PowerEdge R6525
● PowerEdge R7525
Operating systems supported by Dell HBA355i
See Dell Technologies Enterprise operating systems support for a list of supported operating systems by a specific server for
the Dell HBA355i card.
NOTE:
For the latest list of supported operating systems and driver installation instructions, see the operating system
documentation at www.dell.com/operatingsystemmanuals. For specific operating system service pack requirements, see
the Drivers and Downloads section at www.dell.com/manuals.
6 Dell Technologies Host Bus Adapter 355i