Users Guide

Download and save Dell HBA355i drivers from the Dell Systems

Service and Diagnostic Tools

About this task

To download drivers from the Dell Systems Service and Diagnostic Tools media:

Steps

1. Insert the Dell Systems Service and Diagnostics Tools media in your system.

The Welcome to Dell Service and Diagnostic Utilities screen is displayed.

2. Select your system model and operating system.

3. Click Continue.

4. From the list of drivers displayed, select the driver you require.

5. Select the self-extracting ZIP file and click Run.

6. Copy the driver to a CD, DVD, or USB drive.

7. Repeat steps 1 to 6 for all the drivers you require.

Windows driver installation

Before you install the Windows driver for Dell HBA355i, you must first create a device driver media.

● Read the Microsoft Getting Started document that shipped with your operating system.

● Ensure that your system has the latest BIOS, firmware, and driver updates. If required, download the latest BIOS, firmware,

and driver updates from www.dell.com/support/home.

● Create a device driver media using one of the methods listed below:

○ USB drive

○ CD

○ DVD

Install Dell HBA355i driver while newly installing the Windows

Server 2016 and later

About this task

To install the driver:

Steps

1. Boot the system using the Windows Server 2016, or newer media.

2. Follow the on-screen instructions until you reach Where do you want to install Windows Server 2016 or later window

and then select Load driver.

3. As prompted, insert the installation media and browse to the appropriate location.

4. Select a Dell HBA355i series card from the list.

5. Click Next and continue installation.

Install Dell HBA355i driver on which the Windows Server 2016 is

already installed and later

About this task

Perform the following steps to configure the driver for the RAID controller on which the Windows Server 2016 is already

installed:

Driver support for Dell HBA355i