Deployment Guide

System BIOS
49 Setting up BIOS on 15th Generation (15G) Dell EMC PowerEdge Servers | 508
C States
Enabled
Disabled
Write Data CRC
Disabled
Disabled
Memory Patrol
Scrub
Standard
Standard
Memory
Refresh Rate
1x
1x
Number of
Turbo Boost
Enabled Cores
for Processor x
All
All
PCI ASPM L1
Link Power
Management
Enabled
Disabled
Determinism
Slider
Power
Determinism
Power
Determinism
Efficiency
Optimized
Mode
Disabled
Disabled
Algorithm
Performance
Boost Disable
(ApbDis)
Disabled
Disabled
Dynamic Link
Width
Management
(DLWM)
Unforced
Unforced
System BIOS—System Security
The System Security page allows you to perform specific security-related functions such as setting
passwords, managing TPM, and enabling or disabling power or NMI buttons.
Note: The default option setting is depicted in boldface. Dell EMC reserves the rights to change the default
properties.
Menu Item
Options
Description
Intel AES-NI
N/A
Displays the current status of Intel Processor AES-
NI feature. This feature improves the speed of
applications by performing encryption and
decryption by using the Advanced Encryption
Standard Instruction Set.
System Password
N/A
Enables you to set the system password which is
the password that you must enter to allow the
system to boot to an OS. This option is read-only if
the password jumper (PWRD_EN) is not installed in
the system.
A password must have up to a maximum of 32
characters.
Setup Password
N/A
Enables you to set the Setup password. The Setup
password is the one you must enter to change any
BIOS settings, except for the System password,
which can be changed without entering the correct