White Papers

Configure server objects on SC Series storage
18 Dell EMC SC Series Storage and Microsoft Multipath I/O | CML1004
21. When finished, verify that all targets show with a status of Connected.
22. Click OK to exit the iSCSI Initiator Properties window.
23. Log in to the desired SC Series array using the Dell Storage Manager client.
24. Under Hardware, expand the Servers folder to the desired location.
25. Right-click the desired folder and select Create Server.
26. Under Host Bus Adapter, select the iSCSI ports for Fault Domains 1 and 2.
27. Once created, verify that the server object lists the HBAs with a status of Up.
28. Create and map at least one SC Series volume to the server.
29. Configure the MPIO settings (see section 5.)
4.3.1 Manual server configuration with SAS FE
Use the Configure this host to access a Storage Center option in the Dell Storage Manager client to
automatically configure a new server object on the SC series, as shown in section 4.1. In cases where this is
not possible, follow the configuration steps in the Dell EMC SC Series Storage with SAS Front-end for
Microsoft Hyper-V configuration guide. Once completed, create and map at least one SC Series volume to the
server, and then configure the MPIO settings (see section 5).