White Papers

Configure server objects on SC Series storage
16 Dell EMC SC Series Storage and Microsoft Multipath I/O | CML1004
8. From the Local adapter drop-down menu, select Microsoft iSCSI Initiator. From the Initiator IP
drop-down menu, select the local IP address of the server NIC that is to be associated with iSCSI
Fault Domain 1. The initiator IP in this example is 10.10.95.101.
9. Click OK, and then OK again to return to the iSCSI Initiator properties window.
10. Verify that the target IP address and adapter IP address are displayed in the Target portals section.
11. Repeat steps 6–10 to configure the second server NIC for the second iSCSI virtual fault domain. In
this example, the IPs are 10.10.128.1 and 10.10.128.101.
12. When completed, verify that both pairs of iSCSI initiators and targets are listed.
13. Select the Targets tab. This should be populated with the discovered iSCSI target ports on the array.
14. Highlight the first target, and click Connect.