White Papers

6 Dell EMC OEM Identity Module | Installation Guide using GUI
3.3 Setting BIOS to defaults
1. Access System Setup on the host system by pressing F2 during POST.
2. On the System Setup page, click System BIOS.
3. In the bottom-left corner, click Default.
4. Accept all the message to load the BIOS defaults.
5. In the lower-right corner, click Finish.
6. Accept all the messages to save the changes and return to the System Setup page.
7. On the System Setup page, click Finish.
8. Accept all messages to exit System Setup and reboot the system.
4 Verifying installation of Identity Module
You can verify if the rebranding is successful by checking the selected rebranding options such as logos,
BIOS settings, iDRAC and LC settings, and so on.
5 Contact Information
For questions related to this document, contact the account manager responsible for the customer
engagement.