Reference Guide

169 Lifecycle Controller Web Services Interface Guide for Linux
Include SSD only=2
Diskprotocol: Types of protocol to include
Include all protocols=0
Include SATA=1
Include SAStypes=2
DiskEncrypt: Types of encryption to include
0 = Include FDE capable and non encryption capable disks
1 = Include FDE disks only
2 = Include only non FDE disks
PDArray: This parameter is the list of physical disk FQDDs
EXAMPLE:
wsman invoke -a GetRAIDLevels
http://schemas.dmtf.org/wbem/wscim/1/cimschema/2/root/dcim/DCIM_RAIDService?
SystemCreationClassName=DCIM_ComputerSystem,CreationClassName=DCIM_RAIDService
,SystemName=DCIM:ComputerSystem,Name=DCIM:RAIDService
-h $IPADDRESS -V -v -c dummy.cert -P 443
-u $USERNAME -p $PASSWORD
-J GetRAIDLevels.xml -j utf-8 -y basic
The input file GetRAIDLevels.xml is shown below:
<p:GetRAIDLevels_INPUT
xmlns:p="http://schemas.dmtf.org/wbem/wscim/1/cimschema/2/root/dcim/DCIM_RAIDS
ervice">
<p:Target>RAID.Integrated.1-1</p:Target>
<p:DiskType>0</p:DiskType>
<p:Diskprotocol>0</p:Diskprotocol>
<p:DiskEncrypt>0</p:DiskEncrypt>
<p:PDArray>Disk.Bay.0:Enclosure.Internal.0-0:RAID.Integrated.1-1</p:PDArray
>
<p:PDArray>Disk.Bay.1:Enclosure.Internal.0-0:RAID.Integrated.1-1</p:PDArray
>
</p:GetRAIDLevels_INPUT>
OUTPUT:
<n1:GetRAIDLevels_OUTPUT>
<n1:ReturnValue>0</n1:ReturnValue>
<n1:VDRAIDEnumArray>2</n1:VDRAIDEnumArray>
<n1:VDRAIDEnumArray>4</n1:VDRAIDEnumArray>
<n1:VDRAIDEnumArray>64</n1:VDRAIDEnumArray>
<n1:VDRAIDEnumArray>128</n1:VDRAIDEnumArray>
<n1:VDRAIDEnumArray>2048</n1:VDRAIDEnumArray>
<n1:VDRAIDEnumArray>8192</n1:VDRAIDEnumArray>
</n1:GetRAIDLevels_OUTPUT>
The VDRAIDEnumArray numbers correspond to the following RAID levels:
RAIDLevel:
RAID 0 = 2
RAID 1 = 4
RAID 5 = 64
RAID 6 = 128