Reference Guide

164 Lifecycle Controller Web Services Interface Guide for Linux
 Physical disk is wrong type for the virtual disk (i.e. SATA PD to be used as hot spare for SAS VD)
 Similar conditions when no VD referenced, which is the global hot-spare attempted assignment
ERROR MESSAGE:
<n1: AssignSpare_OUTPUT
<n1:Message>Physical disk FQDD did not identify a valid physical disk for
the operation</n1:Message>
<n1:MessageID>STOR009</n1:MessageID>
<n1:ReturnValue>2</n1:ReturnValue>
</n1:AssignSpare_OUTPUT>
16.19.3 Unassigning the Hot Spare-UnassignSpare()
The UnassignSpare() method is used to unassign a physical disk. The physical disk may be used as a
dedicated hot spare to a virtual disk, or as a global hot-spare. After running the method successfully, the
physical disk drive is no longer a hot-spare.
Invoke UnassignSpare() with the following parameters and syntax:
TARGET: This parameter is the FQDD of the DCIM_PhysicalDiskView
EXAMPLE:
wsman invoke -a UnassignSpare
http://schemas.dmtf.org/wbem/wscim/1/cimschema/2/root/dcim/DCIM_RAIDService?Sy
stemCreationClassName=DCIM_ComputerSystem,CreationClassName=DCIM_RAIDService,
SystemName=DCIM:ComputerSystem,Name=DCIM:RAIDService
-h $IPADDRESS -V -v -c dummy.cert -P 443
-u $USERNAME -p $PASSWORD
-J UnassignSpare.xml -j utf-8 -y basic
The input file UnassignSpare.xml is shown below:
<p:UnassignSpare_INPUT
xmlns:p="http://schemas.dmtf.org/wbem/wscim/1/cimschema/2/root/dcim/DCIM_RAIDS
ervice">
<p:Target>Disk.Bay.3:Enclosure.Internal.0-0:RAID.Integrated.1-1</p:Target>
</p:UnassignSpare_INPUT>
OUTPUT:
<n1:UnassignSpare_OUTPUT>
<n1:RebootRequired>YES</n1:RebootRequired>
<n1:ReturnValue>0</n1:ReturnValue>
</n1:UnassignSpare_OUTPUT>
16.20 Managing Keys for Self Encrypting Drives
NOTE: The Dell Key Manager feature is not available at this time.
16.20.1 Setting the Key-SetControllerKey()
The SetControllerKey() method sets the key on controllers that support encryption of the virtual disks.
Invoke SetControllerKey() with the following parameters and syntax:
TARGET: This parameter is the FQDD of the DCIM_ControllerView (Section 16.7)
Key: Maximum size 32 characters
Keyid: Identifier, or description, for the key (maximum size 255 characters)