Administrator Guide

15 : BIOS vs. UEFI | Doc ID 20444677 | June 2018
Figure 5 UEFI PXE boot Configuration.
The parameters to be configured in this page are:
• Interface: the network interface in the PXE client to configure for PXE boot;
• Protocol: the Internet Protocol that will be used for PXE boot (IPv4 or IPv6);
• VLAN: ID and Priority for Virtual LAN if enabled.
4.4 UEFI HTTP Boot Configuration (Boot from URI)
UEFI HTTP boot is supported beginning with Dell PowerEdge 14G systems. The system that provides the
Network Bootstrap Program (NBP) is known as the “HTTP boot server.” The “HTTP boot client” downloads
and executes the NBP to complete the boot process.