User's Manual
Table Of Contents
- Dell OptiPlex 3070 Micro Setup and Specifications
- Set up your computer
- Chassis
- System specifications
- Chipset
- Memory
- Intel Optane Memory
- Storage
- Audio and speakers
- Graphics and Video Controller
- Communications – Wireless
- Communications – Integrated
- External ports and connectors
- System board connector maximum add-in card allowable dimensions
- Operating system
- Power
- System dimensions - physical
- Regulatory and Environmental Compliance
- System setup
- Software
- Getting help
Tower/Small form factor/Micro
Temperature Range -10°C to 70°C
Relative Humidity Range 5 to 95%
Storage
Table 7. Storage
Tower Small form factor Micro
Bays:
Optical Drives Supported 1 Slim 1 Slim 0
Hard Drive Bay Supported (Internal) 1x3.5”/2x2.5” 1x3.5" or 1x2.5" 1x2.5"
Hard Drives Supported 3.5”/2.5” (maximum) 1/2 1/1 0/1
Interface:
SATA 2.0 1 1 0
SATA 3.0 2 1 1
M.2 Socket 3 (for SATA / NVMe SSD) 1 1 1
M.2 Socket 1 (for WiFi/BT card) 1 1 1
3.5” Drives:
3.5 inch 500 GB 7200 RPM HDD Y Y N
3.5 inch 1 TB 7200 RPM HDD Y Y N
3.5 inch 2 TB 7200 RPM HDD Y Y N
2.5” Drives:
2.5 inch 500 GB 5400 RPM HDD Y Y Y
2.5 inch 512 GB 7200 RPM HDD Y Y Y
2.5 inch 512 GB 7200 RPM SED HDD Y Y Y
2.5 inch 1 TB 7200 RPM HDD Y Y Y
2.5 inch 2 TB 5400 RPM HDD Y Y Y
M.2 Drives:
M.2 1 TB PCIe C40 SSD Y Y Y
M.2 256 GB PCIe C40 SSD Y Y Y
M.2 512 GB PCIe C40 SSD Y Y Y
M.2 128 GB PCIe NVMe Class 35 Solid State Drive Y Y Y
M.2 256 GB PCIe NVMe Class 35 Solid State Drive Y Y Y
M.2 512 GB PCIe NVMe Class 35 Solid State Drive Y Y Y
NOTE: 2.5 Inch Solid State Drives are only available as a secondary storage option and can only be paired with a M.2
Solid State Drive as the Primary Storage Device
System specifications 13