Reference Guide

Getting Started | 37
USB-B console
The USB-B connector port is labeled on the the S60 chassis. It is to the left of the management ports, as
you face the rear of the chassis
NC 7 2 4 DTR
CTS 8 1 7 RTS
Step Task
1 Power on the PC (XP operating system recommended)
2 Connect the USB-A end of cable (supplied) into an available USB port on the PC
3 Connect the USB-B end of cable into the USB-B console port on the S60 (see Figure 7)
4 Power on the S60.
5 Install necessary USB device drivers (internet connection required).
Contact Dell Networking TAC for CD, if necessary.
6 Open your terminal software emulation program to access the S60.
Table 3-1. Pin Assignments Between the E-Series Console and a DTE Terminal Server (continued)
E-Series
Console Port RJ-45 to RJ-45 Rollover Cable
RJ-45 to DB-9
Adapter
Terminal Server
Device
Signal RJ-45 pinout RJ-45 Pinout DB-9 Pin Signal
USB-B
Port