Command Line Reference Guide

Security | 933
Parameters
Defaults
30 seconds
Command Modes
INTERFACE
Command
History
dot1x tx-period
c e s
Configure the intervals at which EAPOL PDUs are transmitted by the Authenticator PAE.
Syntax
dot1x tx-period seconds
To return to the default, use the no dot1x tx-period command.
Parameters
Defaults
30 seconds
Command Modes
INTERFACE
Command
History
show dot1x interface
c e s
Display the 802.1X information on an interface.
Syntax
show dot1x interface interface
Parameters
Defaults
No default values or behavior
seconds
Enter a time-out value in seconds.
Range: 1 to 300, where 300 is implementation dependant.
Default: 30
Version 8.3.3.1 Introduced on S60
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
seconds
Enter the interval time, in seconds, that EAPOL PDUs are transmitted.
Range: 1 to 31536000 (1 year)
Default: 30
Version 8.3.3.1 Introduced on S60
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
interface
Enter one of the following keywords and slot/port or number information:
• For a Gigabit Ethernet interface, enter the keyword GigabitEthernet
followed by the slot/port information.
• For a Fast Ethernet interface, enter the keyword FastEthernet followed by the slot/
port information.
• For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.