Command Line Reference Guide

Security | 911
Parameters
Command Modes
Not configured.
Command
History
Usage
Information
Only Force10 Networks Technical Support staff use this command.
enable secret
c e s
Change the password for the enable command.
Syntax
enable secret [level level] [encryption-type] password
To delete a password, use the no enable secret [encryption-type] password [level level] command.
Parameters
Defaults
No password is configured. level = 15
Command Modes
CONFIGURATION
Command
History
Usage
Information
Use this command to define a password for a level and use the privilege level (CONFIGURATION
mode) command to control access to command modes.
encryption-type (OPTIONAL) Enter the number 7 as the encryption type.
Enter 7 followed a text string as the hidden password. The text string must be a
password that was already encrypted by a Force10 Networks router.
Use this parameter only with a password that you copied from the
show
running-config
file of another Force10 Networks router.
password
Enter a text string, up to 32 characters long, as the clear text password.
Version 8.3.3.1 Introduced on S60
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
level level (OPTIONAL) Enter the keyword level followed by a number as the level of
access.
Range: 1 to 15
encryption-type (OPTIONAL) Enter the number 5 or 0 as the encryption type.
Enter a 5 followed a text string as the hidden password. The text string must be
a password that was already encrypted by a Force10 Networks router.
Use this parameter only with a password that you copied from the
show
running-config
file of another Force10 Networks router.
password
Enter a text string, up to 32 characters long, as the clear text password.
Version 8.3.3.1 Introduced on S60
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series