Command Line Reference Guide

686 | Multicast
www.dell.com | support.dell.com
Example
Figure 24-10. Command Example: show ipv6 mroute mld all
show ipv6 mroute summary
e
Display a summary of the Multicast routing table.
Syntax
show ipv6 mroute summary
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 24-11. Command Example: show ipv6 mroute summary
Force10#show ipv6 mroute mld all
MLD SNOOPING MRTM Table
(*, ff05:100::1), uptime 00:04:21
Incoming vlan: Vlan 200
Outgoing interface list:
GigabitEthernet 2/15
GigabitEthernet 2/16
(*, ff05:200::1), uptime 00:04:15
Incoming vlan: Vlan 200
Outgoing interface list:
GigabitEthernet 2/15
GigabitEthernet 2/16
(*, ff05:1100::1), uptime 00:04:18
Incoming vlan: Vlan 200
Outgoing interface list:
GigabitEthernet 2/15
GigabitEthernet 2/16
Force10#
Version 7.4.1.0 Introduced
Force10#show ipv6 mroute summary
IP Multicast Routing Table
12 groups, 12 routes
(165:87:32::30, ff05:100::1), 00:00:24
(165:87:37::30, ff05:200::1), 00:00:24
(165:87:31::30, ff05:300::1), 00:00:24
(165:87:32::30, ff05:1100::1), 00:00:21
(165:87:37::30, ff05:2200::1), 00:00:21
(165:87:31::30, ff05:3300::1), 00:00:21
(165:87:32::20, ff3e:100::4000:1), 00:00:41
Force10#