Command Line Reference Guide

Layer 2 | 635
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 21-11. show vlan Command Example
brief (OPTIONAL) Enter the keyword brief to display the following information:
• VLAN ID
• VLAN name (left blank if none is configured.)
• Spanning Tree Group ID
• MAC address aging time
• IP address
id vlan-id (OPTIONAL) Enter the keyword id followed by a number from 1 to 4094. Only
information on the VLAN specified is displayed.
name
vlan-name
(OPTIONAL) Enter the keyword
name followed by the name configured for the VLAN.
Only information on the VLAN named is displayed.
Version 8.3.3.1 Introduced on the S60.
Version 7.8.1.0 Augmented to display PVLAN data for C-Series and S-Series; revised output to
include Description field to display user-entered VLAN description
Version 7.6.1.0 Introduced on S-Series; revised output to display Native VLAN
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
Force10#show vlan
Codes: * - Default VLAN, G - GVRP VLANs, P - Primary, C - Community, I - Isolated
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack
NUM Status Description Q Ports
* 1 Inactive
2 Active U Po1(Gi 13/0)
T Po20(Gi 13/6), Gi 13/25
T Gi 13/7
3 Active T Po20(Gi 13/6)
T Gi 13/7
U Gi 13/1
4 Active U Po2(Gi 13/2)
T Po20(Gi 13/6)
T Gi 13/7
5 Active T Po20(Gi 13/6)
T Gi 13/7
U Gi 13/3
6 Active U Po3(Gi 13/4)
T Po20(Gi 13/6)
T Gi 13/7
7 Active T Po20(Gi 13/6)
T Gi 13/7
U Gi 13/5
P 100 Active T Po1(Gi 0/1)
T Gi 0/2
C 101 Inactive T Gi 0/3
I 102 Inactive T Gi 0/4
Force10#