Command Line Reference Guide

634 | Layer 2
www.dell.com | support.dell.com
Command Modes
INTERFACE VLAN
Command
History
Usage
Information
To display information about a named VLAN, enter the show vlan command with the name parameter
or the show interfaces description command.
Related
Commands
show config
c e s
Display the current configuration of the selected VLAN.
Syntax
show config
Command Modes
INTERFACE VLAN
Example
Figure 21-10. show config Command Sample Output for a Selected VLAN
Command
History
show vlan
c e s
Display the current VLAN configurations on the switch.
Syntax
show vlan [brief | id vlan-id | name vlan-name]
Version 8.3.3.1 Introduced on the S60.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
description Assign a descriptive text string to the interface.
interface vlan Configure a VLAN.
show vlan Display the current VLAN configurations on the switch.
Force10(conf-if-vl-100)#show config
!
interface Vlan 100
no ip address
no shutdown
Force10(conf-if-vl-100)#
Version 8.3.3.1 Introduced on the S60.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series