Command Line Reference Guide

Layer 2 | 631
See also VLAN Stacking and see VLAN-related commands, such as portmode hybrid, in Chapter 15,
Interfaces.
description
c e s
Add a description about the selected VLAN.
Syntax
description description
To remove the description from the VLAN, use the no description command.
Parameters
Defaults
No default behavior or values
Command Modes
INTERFACE VLAN
Command
History
Related
Commands
default vlan-id
c e s
Specify a VLAN as the Default VLAN.
Syntax
default vlan-id vlan-id
To remove the default VLAN status from a VLAN and VLAN 1 does not exist, use the no default
vlan-id
vlan-id syntax.
Parameters
Defaults
The Default VLAN is VLAN 1.
Command Modes
CONFIGURATION
Command
History
description
Enter a text string description to identify the VLAN (80 characters maximum).
Version 8.3.3.1 Introduced on the S60.
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 6.3.1.0 Introduced on E-Series
show vlan Display VLAN configuration.
vlan-id
Enter the VLAN ID number of the VLAN to become the new Default VLAN.
Range: 1 to 4094.
Default: 1
Version 8.3.3.1 Introduced on the S60.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series