Command Line Reference Guide

628 | Layer 2
www.dell.com | support.dell.com
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
MAC Accounting information can be accessed using SNMP via the Force10 Monitor MIB. For more
information on enabling SNMP, refer to Chapter 3 of the FTOS Configuration Guide.
Example
Figure 21-8. show mac accounting destination Command Example
Related
Commands
show mac cam
e
Display the CAM size and the portions allocated for MAC addresses and for MAC ACLs.
Syntax
show mac cam
Command Modes
EXEC
EXEC Privilege
Command
History
mac-address
(OPTIONAL) Enter the MAC address in the nn:nn:nn:nn:nn:nn format to
display information on that MAC address.
interface interface (OPTIONAL) Enter the keyword interface followed by the interface type,
slot and port information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to display
the MAC address assigned to that VLAN.
Range: 1 to 4094.
pre-Version 6.2.1.1 Introduced on E-Series
Note: Currently, the Force10 MONITOR MIB does not return the MAC addresses in an
increasing order via SNMP. As a workaround, you can use the -C c option in snmpwalk or
snmpbulkwalk to access the Force10 MONITOR MIB. For example:
% snmpwalk -C c -v 2c -c public 133.33.33.131 enterprise.6027.3.3.3
Force10-1#sh mac accounting destination interface gigabitethernet 2/1
Destination Out Port VLAN Packets Bytes
00:44:00:00:00:02 Te 11/0 1000 10000 5120000
00:44:00:00:00:01 Te 11/0 1000 10000 5120000
00:22:00:00:00:00 Te 11/0 1000 10000 5120000
00:44:00:00:00:02 Te 11/0 2000 10000 5120000
00:44:00:00:00:01 Te 11/0 2000 10000 5120000
Force10-1#
show mac accounting access-list Display MAC access list configurations and counters (if configured).
pre-Version 6.2.1.1 Introduced on E-Series