Command Line Reference Guide

250 | Access Control Lists (ACL)
www.dell.com | support.dell.com
Command
History
Example
Figure 7-13. Command Example: show config
show route-map
c e s
Display the current route map configurations.
Syntax
show route-map [map-name]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 7-14. Command Example: show route-map
Related
Commands
Version 8.3.3.1 Introduced on the S60.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
Force10(config-route-map)#show config
!
route-map hopper permit 10
Force10(config-route-map)#
map-name
(OPTIONAL) Enter the name of a configured route map, up to 140 characters.
Version 8.3.3.1 Introduced on the S60.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to
16 characters long.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
Force10#show route-map
route-map firpo, permit, sequence 10
Match clauses:
Set clauses:
tag 34
Force10#
route-map Configure a route map.